Coil Lifter

Coil Tong Systems are project-engineered lifting attachments developed for the safe and controlled handling of steel coils, paper rolls and cable reels through inner or outer gripping. Manual, mechanical or motorized configurations can be combined with optional 360° rotation, sensor-assisted gripping verification, safety locking and compact geometry for intensive coil-handling operations in restricted working areas.


COIL HANDLING & COIL TONG SYSTEMS

Coil Tong Systems

Kalsys Coil Tong Systems are load-specific lifting attachments developed for the safe, controlled and efficient handling of steel coils, paper rolls and cable reels. Depending on the operating requirement, the load can be gripped from the inner or outer surface, while the system can be configured as manual, mechanical or fully automated.

Each system is engineered according to coil dimensions, centre of gravity, lifting orientation, surface sensitivity, operating duty, gripping geometry and crane interface. Their compact gripping architecture provides high manoeuvrability in storage areas where coils are positioned close together, supporting more efficient use of available floor space.

Controlled and Safe Coil Handling in Restricted Spaces

Coil Tong engineering evaluates not only lifting capacity, but also inner or outer gripping method, coil orientation, gripping pressure, available working space, safety locking and operator control. This approach supports controlled load transfer and repeatable operation even in storage areas with limited aisle clearance.

Kalsys Coil Tong Configurations

Motorized Coil Tongs

Motorized systems allowing the operator to control jaw opening, closing and rotational movement from the crane cabin or via remote control.

Mechanical Coil Tongs

Energy-independent systems using a mechanical locking principle triggered by the movement of the crane hook.

Vertical & Horizontal Gripping

Special jaw geometries optimized for vertical or horizontal gripping according to coil-eye orientation and handling position.

Key Engineering Advantages

Precision Gripping

Controlled gripping geometry and optional protective contact surfaces help reduce the risk of damage to coil edges and sensitive surfaces.

High-Safety Locking

Mechanical and electrical safety functions can be incorporated to prevent unintended jaw opening while the load is suspended.

Space-Efficient Operation

Compact gripping geometry supports handling in restricted clearances between adjacent coils and helps maximize storage-area utilization.

Heavy-Duty Structure

S355 or higher-strength structural steel can be used for applications involving dynamic loads and intensive operating cycles.

Technical Specifications & Options

Gripping Method

Application-specific jaw configurations for gripping the coil from its inner diameter or outer surface.

Operating Principle

Manual, mechanical or motorized / automated configurations can be applied according to project requirements.

Rotating Head

An optional integrated motorized 360° rotation unit can be applied to position the suspended load at the required angle.

Sensor Technology

Optical or mechanical sensors can be used to confirm correct load engagement and locking status.

Limit Switches

Electronic limit functions can be incorporated to restrict jaw travel and reduce the risk of excessive opening or over-compression of the load.

Protective Contact Surfaces

Special protective pads and contact-surface options can be applied according to the surface sensitivity of the coil.

Structural Material

S355 or higher-strength structural steel options can be used for demanding heavy-duty applications.

Maintenance-Friendly Design

Accessible lubrication points, serviceable joint assemblies and modular component architecture can be applied to support efficient maintenance and component replacement.

Capacity & Load Geometry

Safe working load is defined on a project-specific basis according to coil dimensions, centre of gravity, gripping orientation and connection geometry.

Crane Interface

The system can be integrated through a crane hook, custom connection or project-specific lifting interface.

Engineered Around the Load and the Operation

Kalsys Coil Tong engineering evaluates safe working load, coil geometry, centre of gravity, gripping points, surface sensitivity, available headroom, operating cycle and crane interface together. Final jaw geometry, control method and safety architecture are defined according to the actual site and operating conditions.

Typical Applications

Iron & Steel
Steel Coils
Paper Rolls
Cable Reels
Storage Yards
Production Lines
Inner / Outer Gripping Options
360° Optional Motorized Rotation
Manual / Automatic Operating Configuration

Quick Offer

Please enter the details into the form to submit a quotation.

Success! Your request has been sent to us.
Error! There was an error sending your request.

Documents

CONTACT US

LET US PROVIDE THE SERVICE YOU NEED

KALSYS values quality and safety.